Shop Now

Click to Enlarge

OptiBelt RBK - Multrib Auto Belt

Stock Code:

5PK1255_OPTI

$36.50 incl GST

Stock Locations

Ballarat:

Special Order
Shepparton:

Special Order

Make an Enquiry

Add to Favourites

Description

DESCRIPTION

OptiBelt RBK - Multrib Auto Belt

Number of Rows: 5 Ribs
Belt Type: Single Side
Length: 1255 mm

The optibelt RBK is a high-performance V-ribbed belt for all modern auxiliary drives in cars and vans.

Space -saving arrangement

New engine design is putting an increasing emphasis on space saving. Small pulley diameters necessitating thin, flexible belts are often the result. Being extremely elastic and dimensionally stable, optibelt RBK ribbed belts can adapt to the respective drive geometry.

optibelt RBK ribbed belts drive the ancillary components in cars. They reduce vibration and give the generator, air-conditioning compressor and the power steering pump the right spin.

Safe power transmission and maximum mileage

Even under environmental influences such as dust, moisture and extreme temperatures, the optibelt RBK ensures safe power transmission. Whether in combination with modern tensioning systems or as an elastic ribbed belt: The optibelt RBK meets the vehicle manufacturer's specifications and achieves maximum mileage. Our wide product range also includes double-sided V-ribbed belts with the profile designation „DPK“.

Safety tips

Please observe installation regulations and safety instructions supplied by the manufacturer of the car
Please only perform installation of the drive belts with special tools and a minimum exertion of force. The use of screwdrivers, crowbars or such tools is prohibited
Do not treat the control unit components with corrosive chemicals. Belts must not come into contact with oil or similar substances
Fill in the timing belt adhesive label legibly and attach it firmly in the engine compartment
If individual components are faulty, the other components must also be replaced

Storage

Store timing belts dry and at +15 to +25ºC.
Improper storage, e.g. exposure to oxygen, light, extreme temperatures or moisture, can change the physical properties and render the V-belt unusable
Until the V-belts are used, they should be stored in their original packaging and free of tension
Do not exceed a height of 300 mm when stacking the belts, otherwise deformation may occur

Please Note - The size of the belt should always be checked with original before purchasing. This is because sometimes different belts are used within the same model/engine variation when there is more than 1 type of alternator / air compressor / power steering pump / etc. used.

Downloads / online selection tools below