Shop Now

Click to Enlarge

Opti - Truck Power Belt

Stock Code:

AVX10X0913M_OPTI

$21.45 incl GST

Stock Locations

Ballarat:

Special Order
Shepparton:

2 In Stock

Make an Enquiry

Add to Favourites

Description

DESCRIPTION

Optibelt MARATHON X

V-belt for passenger cars - open-flanked, form-toothed

Attributes

AVX10 Section
913.00 mm Reference length
Raw edge cogged
Single belt

The optibelt MARATHON X was developed for driving auxiliary units in passenger car and light commercial vehicle engines.

For use in cars and light commercial verhicles

The optibelt MARATHON X was developed for driving ancillary components in the engines of cars and light commercial vehicles. This raw edged V-belt with moulded cogs is distinguished by its high level of durability and its low-stretch tension behaviour.

Technical information: Further development of MARATHON 1

The optibelt MARATHON X V-belt is a further development of the optibelt MARATHON 1. Both products cover the same vehicles and original part numbers and comply with the relevant original equipment standards. Individual dimensions are being continuously converted to the new design, as of June 2018. More detailed information can be provided on request.

Safety tips

Please observe installation regulations and safety instructions supplied by the manufacturer of the car
Please only perform installation of the drive belts with special tools and a minimum exertion of force. The use of screwdrivers, crowbars or such tools is prohibited
Do not treat the control unit components with corrosive chemicals. Belts must not come into contact with oil or similar substances
Fill in the timing belt adhesive label legibly and attach it firmly in the engine compartment
If individual components are faulty, the other components must also be replaced

Storage

Store timing belts dry and at +15 to +25ºC.
Improper storage, e.g. exposure to oxygen, light, extreme temperatures or moisture, can change the physical properties and render the V-belt unusable
Until the V-belts are used, they should be stored in their original packaging and free of tension
Do not exceed a height of 300 mm when stacking the belts, otherwise deformation may occur

Downloads / online selection tools below