Conversion Chart

  • You must order at least 50 of "Button Head Cap Screw - ZP - M10 x 60 (Box=50)"

Button Head Cap Screw - ZP - M10 x 60 (Box=50)

ISO7380 / CLASS 012.9 - M10-1.50 x Fully Threaded
Stock Code:
SBSOZCM100060
$4.31 incl GST
Minimum Order Quantity: 50

Stock Locations

  • Ballarat:
    Special Order

Must be ordered in multiples of 50

Make an Enquiry
Add to Favourites

Description

DESCRIPTION

Button Head Cap Screw - ZP - M10 x 60 (Box=50)

Button Head Socket Screws have a larger bearing surface, low profile head and are installed using an allen key. Button socket screws provide a larger bearing surface and a lower head profile than a socket head cap screw and are generally used when the material is too thin to countersink, or decorative finish is desired. Use a hex key also called an Allen wrench or hex power bit to drive a socket screw. The tensile strength isn’t as high as a socket head cap, but as a comparison they are twice the strength of a machine screw

They are fully threaded and have uniformly threads, meaning they maintain the exact same diameter throughout the entire length of the threaded section of the fastener, unlike self tapping or chipboard screws which have tapered threads

Also known as: Socket Button, Button Allen Head, Button Hex, Allan Bolt, BHSS

Finish
ZINC PLATED (RoHS Compliant)
 
Zinc Plated is the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of Zinc is applied by either electroplating or mechanically. It is intended to be used internally. Whilst some people use it externally it isnt recommended if corrosion is a concern. If you want a fastener that will withstand the outdoor elements choose from our Stainless steel range
 
Product
BUTTON HEAD SOCKET SCREW HEX
 
Size
M10
 
Specification
ISO7380 / CLASS 010.9
 
Length / Dimension
60
 
Thread
M10-1.50 x Fully Threaded Thread length on older stock may vary
 
 
Click here for Hobson SOKO product guide
 
Click here for product finish comparison
 
Click here for hobson breaking strength guide
 
Click here for SOKO Metric recommended tightening torque class 10.9

Still can't find what you're looking for? Our website is continuously being updated, so contact us by phone or email for anything else:

Phone:
03 5336 1111

Email:
online@iw.net.au

Details

  • Left or Right Hand:
    Right Hand
  • Material:
    Zinc Plated 12.9 Steel
  • Brand:
    Hobson
  • Metric/Imperial:
    Metric
  • Size:
    Each
  • Length:
    60 mm