Conversion Chart

  • You must order at least 100 of "Nyloc Hex Nut - HT - ZYP - M14 (Box=100)"

Nyloc Hex Nut - HT - MGAL - M64 (Box=5)

DIN985 / CLASS 8 - M64
Stock Code:
NN08GCM64
$154.69 incl GST
Minimum Order Quantity: 5

Stock Locations

  • Ballarat:
    Special Order

Must be ordered in multiples of 5

Make an Enquiry
Add to Favourites

Description

DESCRIPTION

Nyloc Hex Nut - High Tensile - Mechanical Galvanised - M64 (Box=5)

(Price per unit)

Nyloc Insert Nuts feature a nylon ring at the top of the nut that locks onto the bolt threads once fully tightened. This creates a friction-based locking action that helps prevent loosening due to vibration, removing the need for a separate lock washer.

  • Nylon insert grips the bolt threads when the nut is seated
  • Locking action is based on friction, not additional hardware
  • Helps resist loosening under vibration and movement
  • Designed for single-use applications

The nylon insert deforms during the first installation, which means its locking effectiveness is reduced if the nut is reused.

Nuts should be selected to match a compatible bolt grade and material system to ensure proper strength and performance.

Heat Tolerance.  For high temperature applications, ie above 120 °C , use an all metal locking nut, (e.g. Stover, Conelock, K-Lock) which does not have nylon and is rated to the same temperature as the steel itself.

Recommended use:
Standard open-air finish for timber framing, fencing, decking, retaining walls, and applications involving treated timber contact (H3 and H4 treated pine). Provides longer lasting corrosion protection in most outdoor and agricultural type environments.

Also known as: Nyloc Nuts, Nylon Insert Lock Nuts, Nyloc Insert Nuts, Self-Locking Nuts (Nylon), Polystop Nuts

Product

NYLOC HEX NUT
 

Finish

MECHANICAL GALVANISED
 
MGAL provides better abrasion resistance than HDG and does not introduce any risk of hydrogen embrittlement. MGAL products provide similar corrosion resistance to HDG.
 
A nut with a mechanically galvanised coating is typically used anywhere you need a corrosion-resistant fastener, but not necessarily the heavy-duty thickness of hot-dip galvanising.
 
Size
M64
 
Specification / Reference
DIN985 / CLASS 8
 
Thread
M64-6.00
 
 
Click here for hobson high tensile product guide
 
Click here for hobson tightening torque & prevailing torque lock nuts
 
Click here for hobson nyloc nylon insert nuts proof load technical data
  
Click here for hobson finish comparison
 
Click here for hobson technical anti vibration paper
 
Click here for spanner selection for hex bolts & nuts metric

Details

  • Thread Size:
    M64-6.00
  • Left or Right Hand:
    Right Hand
  • Material:
    Steel - Galvanised - Grade 8
  • Brand:
    Hobson
  • Metric/Imperial:
    Metric - Standard
  • Type:
    Each