Conversion Chart

  • You must order at least 2 of "Nyloc Hex Nut - HT - ZYP - M48 (Box=2)"
  • You must order at least 100 of "Wing Nut - 316 SS - M10 (Box=100)"
  • You must order at least 50 of "Nyloc Hex Nut - M20 Galvanised (Box=50)"

Nyloc Hex Nut - HT - ZYP - M48 (Box=2)

DIN985 / CLASS 10 - M48
Stock Code:
NN10YCM48
$141.09 incl GST
Minimum Order Quantity: 2

Stock Locations

  • Ballarat:
    Special Order

Must be ordered in multiples of 2

Make an Enquiry
Add to Favourites

Description

DESCRIPTION

Nyloc Hex Nut - High Tensile - Zinc Yellow Passivate - M48 (Box=2)

(Price per unit)

Nyloc Insert Nuts feature a nylon ring at the top of the nut that locks onto the bolt threads once fully tightened. This creates a friction-based locking action that helps prevent loosening due to vibration, removing the need for a separate lock washer.

  • Nylon insert grips the bolt threads when the nut is seated
  • Locking action is based on friction, not additional hardware
  • Helps resist loosening under vibration and movement
  • Designed for single-use applications

The nylon insert deforms during the first installation, which means its locking effectiveness is reduced if the nut is reused.

Nuts should be selected to match a compatible bolt grade and material system to ensure proper strength and performance.

Heat Tolerance.  For high temperature applications, ie above 120 °C , use an all metal locking nut, (e.g. Stover, Conelock, K-Lock) which does not have nylon and is rated to the same temperature as the steel itself.

Typical applications - Automotive, machinery & equipment, construction, marine & outdoor equipment, consumer products

Also known as: Nyloc Nuts, Nylon Insert Lock Nuts, Nyloc Insert Nuts, Self-Locking Nuts (Nylon), Polystop Nuts

Product

NYLOC HEX NUT
 
Finish
ZINC YELLOW PASSIVATE
 
Product is electroplated with zinc which is then passivated with a iridesencent yellow conversion layer. ZYP products have a greater resistance to corrosion then Z/P and are recommended for low-corrosion environments.  (See guide below)
 
Size
M48
 
Specification / Reference
DIN985 / CLASS 10
 
Thread
M48-5.00
 
 
Click here for hobson high tensile product guide
 
Click here for hobson metric nyloc nuts tightening torque class 10
 
Click here for hobson nyloc nylon insert nuts proof load technical data
  
Click here for hobson finish comparison
 
Click here for hobson technical anti vibration paper
 
Click here for spanner selection for hex bolts & nuts metric

Details

  • Thread Size:
    M48-5.00
  • Left or Right Hand:
    Right Hand
  • Material:
    Steel - Yellow Zinc - Grade 10
  • Brand:
    Hobson
  • Metric/Imperial:
    Metric - Standard
  • Type:
    Each