Conversion Chart

Serrated Flanged Hex Bolt HT ZP - M6x12 (Box=100)

DIN 6921 / CLASS 8.8 - M6
Stock Code:
BF88ZCM060012
$0.50 incl GST

Stock Locations

  • Ballarat:
    200 In Stock
Make an Enquiry
Add to Favourites

Description

DESCRIPTION

Flange Hex Serrated - Z/P - M6 x 12 (Box=100)

Hex Flange Serrated Bolts have a hexagon head with a built-in washer and under head teeth like serrations which bite into the surface to help prevent loosening. The built-in washer acts to distribute the clamping load over a greater area and the wide flange head is designed to provide the same holding power as a washer. Can be used to fasten objects together by inserting the bolt from the one end and securing it with either a nut on the other end or into a taped hole

Product
SERRATED FLANGED HEX BOLT
 
Finish
ZINC PLATED (ROHS COMPLIANT)
Zinc Plated is the most common fastener of plating due to its the low cost and shinny bright silver finish. A thin layer of zinc is applied by either electroplating or mechanically. It is intended to be used internally. Whilst some people use it externally it isnt recommended if corrosion is a concern. If you want a fastener that will withstand the outdoor elements choose from our Stainless steel range
 
Size
M6
 
Specification
DIN 6921 / CLASS 8.8
 
Length / Dimension
12
 
Thread
M6-1.00 x Fully Threaded Thread length on older stock may vary
 
 
Click here for bolt technical specifications
 
Click here for hobson high tensile product guide
 
Click here for hobson breaking strength guide
 
Click here for high tensile & stainless steel head markings 
 
Click here for spanner selection for hex bolts & nuts
 
Click here for product finish comparisons
 
Click here for bolt & set screw information
 

Still can't find what you're looking for? Our website is continuously being updated, so contact us by phone or email for anything else:

Phone:
03 5336 1111

Email:
online@iw.net.au

Details

  • Left or Right Hand:
    Right Hand
  • Brand:
    Hobson