Shop Now

Abrasives & Drilling
- Bench Wheel
- Blade
  - Hacksaw Blade
  - Jigsaw Blade
  - Reciprocating Saw
- Burr
- Combiclick
- Cut
- Deburring
- Die
- Die Grind
- Drill
  - Annular Cutter
  - Auger Bit
  - Centre Drill
  - Cobalt
  - Countersink Bit
  - General Purpose
  - Impact Drill
  - Left Hand
  - Long Series
  - Masonry
  - Metal
  - Reamer
  - Reduced Shank
  - Slot
  - Spade Bit
  - Stainless Steel
  - Step drill
  - Taper Shank
- Emery
- Fan Grinder
- Fibre Disc
- File
- Flap Disc
- Grind
- Hand Polish & Sand
- Hole Saw
- Sanding Belt
- Screw & Stud Extractors
- Tap
- Tap & Die Sets
- Tool Bit
- Wire Brush
Adhesives - Sealants - Paints - Cleaners
Bearings & Housings
Bolts & Fasteners
- Bolt & Nut Sets
  - Cup Head
- Bolts
- Nuts
  - Hex - Collared
  - Hex - Cone Lock
  - Hex - Dome
  - Hex - Flange
  - Hex - Hobloch
  - Hex - Plow
  - Hex - Slotted
  - Hex - Standard
  - Hex - Thin
  - Hex - Weld
  - Nyloc - Flange
  - Nyloc - Standard
  - Nyloc - Thin
  - Rivet
  - Square
  - Structural
  - Tee
  - Track
  - Wing
- Rivets
- Sleeve Anchors
- U-Bolts
- Washers
  - * Flat
  - * Spring
  - Anti-Loss
  - Bearing Preload Spring
  - Belleville
  - Bushing
  - Conical Load
  - Cup
  - Disc Spring
  - Flat Washer
  - High Stress Load
  - Holding
  - Insulator
  - Load Indicator
  - Lock
  - Nord-Lock
  - Retaining
  - Security Mesh
  - Serrated
  - Serrated Safety
  - Spring Washer
  - Square
  - Squirter
  - Structural
  - Taper
  - Volute Spring
Combination
- Snipe nose
  - Diagonal Cutter
Engineering Supplies
Filters
Lubrication
Materials Handling
Power Transmission
Safety
Sealing
Tools
Tractor & PTO
Trailer Parts
- Jockey Wheels
- Tow Kit

Click to Enlarge

Mudguard Washer Bumax 88 M8 (Box=1)

ISO 7093 / BUMAX 88 - M8

Stock Code:

WRB8MM08

$10.12 incl GST

Stock Locations

Ballarat:

Special Order

Make an Enquiry

Add to Favourites

Description

DESCRIPTION

Mudguard Washer Bumax 88 M8 (Box=1)

(Price per unit)

Mudguard Washers offer an extra-wide bearing surface that is useful when working with oversized or irregularly shaped holes.

Can be used when fastening soft materials that could benefit from increased support.
Also known as Penny washers and fender washers.

The outside diameter is approximately three times the bolt diameter, making it significantly larger than a standard flat washer for the same bolt size.

This increased size helps distribute the load more effectively and reduces the risk of pull-through in softer or thinner materials.

Note: For galvanic compatibility always pair the washer material to the bolt & nut: Bumax bolt & nut to Bumax washer.

Mixing materials can create corrosion & less durability in damp, wet environments.

Applications

Bumax 88/109 are used in demanding applications. Industries like oil and gas, pulp and paper, marine, petrochemical, energy and many other industries where standard A4 fasteners simply cannot do the job.

Product

MUDGUARD WASHER

Finish

BUMAX 88

Bumax 88 and Bumax 109 are premium A4 fastener products in the Bumax family. It is known as a very consistent product that offers higher yield strength, lower amount of inclusions and tighter tolerances in chemical composition compared to standard A4 fasteners.

Further information can be obtained in the guides below

Size

Specification / Reference

ISO 7093 / BUMAX 88