Conversion Chart

Loctite - 222 Threadlocker Low Strength Purple

10ml
Stock Code:
471660_LOCTITE
$16.71 incl GST

Stock Locations

  • Ballarat:
    42 In Stock
Make an Enquiry
Add to Favourites

Description

DESCRIPTION

LOCTITE® 222 - 10 Ml Bottle

Purple, low-strength threadlocker for small fasteners

Part No. / SKU / IDH: 471660

If you’re working with small-diameter screws made of low-strength metals (e.g. aluminium or brass), try LOCTITE® 222. It is ideal for low-strength threadlocking of adjustment screws, countersunk head screws, and set screws.

  • Ideal for low-strength threadlocking of adjustment screws, countersunk head screws and set screws
  • Prevents fastener loosening on vibrating assemblies, e.g. pumps, gear boxes, presses
  • Ideal for small thread sizes up to 6.35 mm (1/4")
  • Can be disassembled with ordinary hand tools for easy service and maintenance

 Technical Specifications

  • Product category: Threadlockers
  • Technologies: Acrylates, anaerobic cure
  • Agency approvals / certificates / specifications, Regional approval for Europe only: NSF P1 Reg. No 123002
  • Application method: Dispense system; Manual
  • Application temperature: -55.0 °C - 150.0 °C (-65.0 °F - 300.0 °F)
  • Applications: Threadlocking
  • Breakaway torque, M10 Steel Nuts/Bolts: 6.0 N·m (50.0 in./lb.)
  • Colour: Purple
  • Cure type: Anaerobic cure
  • Fixture time: 20.0 min
  • Key characteristics: Disassembly: removable; Fluorescent; General purpose; Mix: no mix required; Strength: low Strength; Thixotropic
  • Physical form: Liquid
  • Prevail torque, M10 Steel Nuts/Bolts: 4.0 N·m (35.0 in./lb.)
  • Recommended for use with: Metal; Metal: passive metal 
  • Viscosity, Speed 20 RPM, 25.0 (77.0 ): 1200.0 mPa·s (cP)

How to use

1. Surface preparation — Cleaning

It is recommended to use LOCTITE® SF 7063/7064 to degrease and clean surfaces prior to applying adhesive.

2. Surface preparation — Activation

If cure speed is too slow due to passive metals (stainless steel, aluminium and plated metals) or low temperature (below 5°C), use activator LOCTITE® SF 7649 (see cure speed vs activator graph in the TDS).

3. Application

Apply liquid threadlocker to the engagement area.

4. Through-hole applications

Insert bolt and apply threadlocker to the exposed thread. Assemble nut and tighten to the correct/specified torque.

5. Blind-hole applications

Apply into lower third of blind hole.

6. Assembly

Assemble and tighten. If several bolts are being assembled, torque them down to the correct value within the fixture.

7. Disassembly

Disassemble with standard hand tools.

Service tip

For the disassembly of corroded or seized parts use LOCTITE® LB 8040 Freeze and Release.

Downloads and resources below

Loctite product guide

 

Details

  • Brand:
    Loctite

Related Products